Car won't start wiring?

Hi . Just after a bit help getting my 96 sti import running. Car cranks fine and was running. It cut out after driving for about 15 mins. Now has no spark or fuel. The check engine light doesn't come on when ignition is on and I can't carry out flash code diagnostic check. I've changed ecu and engine loom and the loom around the front of the car as it was damaged a while back. I think it's getting power to the ecu( checked with a metre) has a cobra alarm / immobiliser fitted . Any ideas on what to check next would be greatly appreciated

crank sensor is the main sensor ecu uses for initial starting, if its not even attempting to fire atall then most likely its this, assuming u don't have a wiring fault

Andy

Cheers I was going to try this today but was thinking ecu may not have power as I'm not getting check engine light when I turn ignition on. Also can't run a flash code diagnostic . Could crank sensor cause this too

go in fues box under bonnet and there is a green fuse with glass or perspex top and swap it for the one thats next to it

Cheers mate but I've checked all fuses with a metre today. I'll still try it tho lol

it dosent look like a fuse it looks like a relay but there is two green ones one does windows ect ect and other does ecu i had same problem exactly how your describing and was that green sbf (slow burn fuse) and i swapped them engine light back on and bang it fired

Mate u were right I owe u big time. Thanks very much for the help

cool ya windows wont work now but just get another and ya will be fine check ya battery earth and live thats what causes them fuses to blow

check there tight i mean

Another good call by Andy bish

Yeah mate that's what happened the other day lol. Thanks again

Very good lad is bishy

Quality info bish

I will have one so If your at metro center on Wednesday next week will pop it along